506 – OneNote 2016 reprieve

Posted on December 2, 2019 by ewand

OneNote is, for a lot of fans, the best application that Microsoft makes, especially in an educational setting. About 18 months ago, it was announced that the venerable and extensible (especially if you’re a OneTastic / OneCalendar user) desktop version was being put out to pasture, in favour of the more modern, erm, Modern version.

Office 2019 was no longer going to ship with OneNote – the desktop app was not being developed beyond OneNote 2016, but it would still be freely installable if desired.

Efforts would be focussed on the Modern / Store / “OneNote for Windows 10”, which shares a lineage with the mobile apps; there’s a lot to be said in favour of this strategy, since it would bring the UX of the Windows Store, tablet, phone and web apps into alignment. For regular ToW readers, this has been covered ad nauseam.

Well, blow me down, a brilliant Ignite session from @Ben Hodes only went and wound the clock back (and simultaneously painted it forward)… [Check out Union Jack Man at 42:18 in the video stream if you want a laugh]

OneNote 2016 is getting some CPR, and will be installed by default with clean Office setups again, early in 2020.

Point of clarity – a clean Office2019 / Office 365 install doesn’t currently include OneNote 2016 … but upgrading from an existing Office install that already had OneNote, does. If need be, go to http://aka.ms/installonenote to install OneNote 2016.

Some new features are coming, too – like Dark Mode, @mentions, To Do integration and more. The OneNote for Windows 10 code base is being back-ported to the older Win32 version; in time, the same underlying code will exist, even if there remains two versions of the product. It was previously reported that across the Office suite on Windows, the Win32 codebase will be favoured going forward, even though Modern versions were released for several of the traditional apps. We will have to wait and see.

Of course, lots of functionality exists in common between the two current versions of OneNote, even if the level of detail and the way to invoke and use it is a little different – take Record Audio, for example.

Did you know that if you insert an audio recording into your OneNote page, that any handwritten or typed notes you take while the recording is underway, will be linked to the corresponding place in the audio?

Later, if you click on a block of text or handwriting, you can play back the recording at just that point, or if you just start playing the audio, the notes you took will be highlighted as the playback progresses.

In OneNote 2016, you can also have the application index the contents of audio recordings, looking for keywords. Enable it at File > Options > Audio & Video.

No such function appears to exist in the OneNote for Windows 10 app; maybe that’s a good thing. After all, OneNote 2016 only lets you turn it on after an ominous-sounding warning…

503 – OneDrive Personal Vault

Posted on November 2, 2019 by ewand

A previously-announced capability of OneDrive has been widely rolling out – the Personal Vault. This is a special area of your OneDrive Personal storage which is invisible until you choose to unlock it, using a second strong factor of authentication (such as 2FA and the Microsoft Authenticator mobile app). On a mobile device, you can use a PIN, fingerprint or facial recognition to provide the additional identity verification.

When you unlock the Personal Vault from the OneDrive app on your PC (eg. right-click on OneDrive’s white cloud icon in your system tray), it appears as a special folder under the root of your personal OneDrive folder list, on PCs where your OneDrive content is synchronised.

Browsing in your OneDrive data folder, you may need to enable Hidden Items in the View tab to even see it.

You can treat it like any other folder, adding files and other folders that are particularly sensitive – scans of important but infrequently-accessed documents like passports, driving licenses and so on.

Why infrequently accessed, you may ask?

When the PV is visible, it will re-lock after 20 minutes of inactivity (or can be locked manually) and would need another 2-factor authentication method to unlock it again (text message, phone-app approval etc). On the PC, when the PV is locked, the “Personal Vault” folder (and therefore everything under it) is completely hidden and therefore any files within it do not exist as far as Windows is concerned.

In fact, the PV isn’t just a hidden folder – it’s treated by Windows as another physical volume that is mounted on the PC for the duration of it being unlocked; a Junction is then created so it can be accessed as if it’s part of your OneDrive data folder. When the PV is locked again, the volume is dismounted and the junction disappears, so there is no way to access the data using the normal file system.

If you had a file in your now-locked PV that you tried to access from the most-recently-used files list in either Windows itself or within an app, you’ll get a jarring “file does not exist” type error rather than a prompt to unlock the PV and the file within.

Maybe apps will in time come to know that a file is in PV, and prompt the user to unlock before opening?

Then again, security through obscurity (the most sophisticated form of protection, right?) might be a good thing here; when the PV is locked, there is no such folder therefore no apps can get access to it without the user taking specific and separate action to unlock it first. Not being seen is indeed a useful tactic.

Personal Vault can be accessed from the PCs or mobile devices through the OneDrive app, or in a browser – at onedrive.com. No Mac support is planned.

Unlike in the PC scenario, the PV folder is always shown and indicates if it’s open or locked based on the icon.

The Web UI offers other help and advice about how to use the Personal Vault effectively.

OneDrive on PC – Setup error 0x8031002c

Enabling Personal Vault for the first time might throw an error if your PC is corporately managed with a BitLocker policy.

To work around this and get up and running, try:

Press WindowsKey and type Group Policy, then open the Edit group policy control panel (if you don’t see this or get an error, try running mmc from a WinKey+R prompt, then File | Add/remove Snap-in | Group Policy Object… | Add | Local Computer | Finish | OK)
Expand to the Computer Configuration | Administrative Templates | Windows Components | BitLocker Drive Encryption | Fixed Data Drives node
Double-click on the Choose how BitLocker… setting and update it to Disabled then hit OK
Press WindowsKey+R and type cmd then hold SHIFT+CTRL when pressing ENTER, to run the command prompt with administrative rights
In the ensuing command prompt enter gpupdate /force and, assuming everything runs without blowing up, you can close the command & Group Policy windows down and try enabling Personal Vault again.

Tip o’ the Week 499 – Cortana resurrection?

Posted on October 3, 2019 by ewand

Cortana was supposed to be the differentiator for Windows Phone. 5 years ago, before Alexa had wormed her way into kitchens of millions of people and forced Google to respond with their range of devices, Siri and Cortana were the assistants in town. When Windows Phone carked it, Cortana transferred her attention to Windows 10, though there have been a few redesigns after feedback from users, such as preferring to have the search dialog shorn of Cortana-ness.

In latest news, rumours have surfaced of some kind of Microsoft speaker to be announced, though it’s purely a design patent rather than any details of what it might do – Cortana? Or just a companion device for making Teams calls? Time will tell. The same source unveiled a patent for a Roundtable type device at the same time last year – ahead of the autumn Surface launch event – and nothing seems to have come of that yet.

The much-trumpeted GLAS home thermostat (competing with Nest, basically) has dropped Cortana from the device, and the Cortana-powered Harman Kardon Invoke speaker (which, by all accounts, is a really good speaker) has sunk beneath the waves following a fire sale to get rid of stock. Cortana is reportedly disappearing from Xbox too, though a wider speech strategy is in place so she won’t go too far.

Cortana has been repositioned from being a consumer service or device, to a series of services that add value by integrating with your productivity applications and services. Additionally, efforts have gone into making speech/AI assistants interoperable.

In a recent Windows 10 build pushed to Insiders, Cortana is getting a new look – again – and will eventually roll out around the world, rather than be limited to a few locations as it had been previously.

If you’re on the insider program for Windows 10 and using a UK language machine, you may find that the new Cortana app doesn’t want to talk to you, unless you set English (United States) as your Windows Display language.

Also click on each entry in the Preferred languages list, and make sure you have all the speech and proof-reading features installed.

The original vision of Cortana’s usefulness is evolving so that when you enable the service, it now searches your email and calendars on a variety of sources (Office 365, Gmail etc) and will remind you when you say things in email (eg I’ll give you a call on Tuesday) – it’s vaguely spooky when you first start to use it, but after a while proves to be really useful.

As To Do and the Microsoft Launcher continue to improve and integrate, the original vision of Cortana might well come back to being more than a gimmick to ask for directions or the current weather – a genuinely personal assistant that will help you organise your life and get more stuff done.

Tip o’ the Week 496 – Dark Mode marches on

Posted on September 13, 2019 by ewand

Back in the olden days of computing, wage slaves sat in front of terminals with black backgrounds and lurid green text writing. The advent of the graphical user interface relieved this tyranny with a paper-white background from a bitmapped screen to write your WYSIWYG text, to showcase colourful graphics (and Fonts!).

Fast forward 30+ years and it seems every app and OS is running away from black text / white backgrounds, and heading for monochrome graphics and oppressive white text on a black background again.

Using Dark Mode, either in apps or in the operating system on your computer or phone, promises a variety of benefits – less noticeable flickering, reducing eye strain, avoiding bright lights in a dark environment, perhaps better readability and therefore productivity, and even lower energy costs.

Dark Mode has existed in Windows for a while – but ultimately, apps need to support the theme, too, and more and more are doing so – like new Edge browser, or Office apps (where you can set the Office Theme).

Microsoft recently put out a groovy video to highlight Dark Mode across a variety of apps and device types, and some commentary about why and when. It’s even come to Outlook.com as well.

The announcement on Microsoft 365 functionality adds for August 2019 highlighted additional Dark Mode support coming to Outlook mobile apps and Outlook.com, saying, “Dark Mode is not only easier on the eyes and may extend battery life, it also enables you to comfortably continue using your device in places where the default bright mode isn’t appropriate, like darkened airplanes and movie theaters.”

So kids, next time you want to go and watch a movie & catch up on your email, make sure you’ve Dark Mode on!

Tip o’ the Week 495 – Your Phone updates

Posted on September 13, 2019 by ewand

As Samsung recently released the new Galaxy Note 10 premium phone (some versions later than the now infamous Note 7 with battery issues), one prominent new feature may have inadvertently caused a headline during the last week. “Microsoft’s Your Phone App is Down” might have made some readers question, what is Your Phone anyway? (It’s back up now, btw).

Your Phone is a PC and companion iOS or Android app that lets the user of both device sync data and other experiences between them. Initially focussed on photo sharing, it grew to encompass other areas like allowing you to view and reply to text messages on your phone, using the PC’s screen & keyboard instead, thus avoiding any embarrassing auto-correct moments.

The photo sync between phone and PC is more real-time than synching via OneDrive or similar, and it’s a bit more usable for many. But since the May 2019 update to Windows 10, there have been a load of other changes to Your Phone.

It’s possible to share notifications from mobile apps – so you could see Android notifications shown on your PC, too – the goal being that in time, you’d be able to view and respond to them on your computer. If you set it up, do so carefully – you don’t want to be getting notifications on your PC that your phone has sent, for stuff that the PC is already notifying you for… like Outlook, or Teams. Otherwise, you’ll be getting a blizzard of notifications to the point of ignoring them all.

Finally, if you have a Samsung device on the extensive list of currently one, you can share your screen between phone and PC. The plan is, this would allow you to fully operate your phone – including making and taking calls – from your PC, and it’s likely that this will end up growing to other Samsungs and to other manufacturers.

Tip o’ the Week 490 – Bluejacking LinkedIn

Posted on August 6, 2019 by ewand

There was a time when nefarious sorts could fire up their mobile in a busy place and send unsolicited messages to any hapless punter not smart enough to switch their own phone to not receive unsolicited Bluetooth connections – a process known as Bluejacking.

Mostly harmless, it was a way of making people take their own phones out of their pocket and look around in a puzzled fashion over what was happening – useful entertainment in a boring theatre or a packed train carriage. Mobile platforms stopped leaving these things on by default – booo – but it’s probably for the best.

Still, the more modern way of dishing out business cards – LinkedIn – has another way to harness the same basic technology for good. ToW #461 discussed the QR-code method of sharing a LinkedIn profile with someone, and it’s a great way of doing it 1:1, by pointing a camera at someone else’s phone to make the connection with them.

But there is another way that is perhaps more useful when dealing with several people at once – a networking meeting with people you don’t know, or a business gathering where you might be communing with several new people at one time. Or a party. If you’re at a pretty sad party.

If you start the LinkedIn app on your phone and tap the My Network icon on the bottom toolbar, you’ll see the Find nearby option, which allows you to see anyone else in the vicinity who has similarly switched on the same feature. On enabling, you may need to turn on Bluetooth and then separately allow the sharing of data, and of the LinkedIn app to use it.

You’ll see a list of who’s in the vicinity and with a single tap, can connect with them on LinkedIn. Make sure you remember to turn it off again, in case you inadvertently show up on some unknown ne’er-do-well’s phone, as the Nearby functionality can continue even when you leave that page.

But it you’re careful, it’s a great way to mutually share contacts with a group of people. See more here.

Tip o’ the Week 483 – mobile OCR and Office

Posted on June 7, 2019 by ewand

Optical Character Recognition is one of those technologies which has gone from being just-about-possible at great expense and hassle, to so mainstream that people just assume it will work flawlessly, all in a relatively few years. Numerous companies offer OCR services or addins to line-of-business systems which help to prepare printed data for easier consumption – scanning invoices for example.

Consumers tend to use OCR in other ways; combined with language translation, you can point your phone at a foreign menu or sign and it may be able to help you understand. In OneNote, if you have captured an image (maybe through the clipper addin from your browser), then it can extract the text from that picture – not always perfectly, and not necessarily well-formatted, but it’s probably quicker than re-typing everything.

Near OCR functionality is also pervading the slew of freely available Office apps for Android tablets, phones and even Chromebooks, and similar versions for iPad and iPhone.

A recent addition to the iOS version of Excel is the ability to scan a table of printed data and use OCR plus a bit of tweaking, to import the data into the spreadsheet. See more here. The same functionality was first made available on Android a couple of months earlier …

Start with the grid capture icon on the toolbar of a new spreadsheet, and then use the camera to highlight the area of a document that you’re interested in – the UI will be familiar to anyone who uses Office Lens, as the same anti-skewing technology is used to prepare the “document” for importing.

Then the OCR goes to work and tries to lay out the data as closely as possible to its source – obviously, your accuracy will be improved by having a well-lit and clear original document, and you’ll get to tweak the contents in context of seeing the OCR’d data and the scan at the same time, before committing to insert it.

Tip o’ the Week 480 – Installing Apps in New Edge

Posted on May 31, 2019 by ewand

Whatever you call it – New Edge, Edge Dev, Edgemium, Chromdge etc – the new Windows browser called Edge but with its rendering gubbins based on Chromium is making progress with regular updates and has quite a following already.

ToW 476 covered some of the articles that were written when it first came out, but buried within was a slew of interesting features that merit their own mention.

Such a capability is being able to install a web page as an App, making it look a lot like a normal Windows app to some degree. In older Edge browser, this was known as pinning a site.

In New Edge, just go to the … menu (top right) on any web page, and under Apps, you can Manage apps and install pages.

If the current site is a regular web page, you’ll see “Install this site…” but if the page is itself a Progressive Web App (PWA), like the Starbucks example above, then it will likely declare its name. There are lots of PWAs out there already – see here as an example – some are managed through the Windows Store, but since Google allowed Chrome / Chromium to install PWAs, many are published online and available directly.

Users don’t even need to know what a PWA is, for the most part – if a site looks and feels like an app, then that’s what it is. Some publishers report dramatic improvements in using PWA when compared to more traditional iOS/Android or UWP apps – Tinder, for example, found the PWA was 90% smaller than the regular app.

It seems that when Tindering, size really does matter.

Tip o’ the Week 478 – O365 and Windows’ Mail and Calendar

Posted on May 8, 2019 by ewand

On the mobile platforms that still survive, the highly-regarded and rightly popular “Outlook” mobile apps have no relation to the Outlook desktop Windows app which first appeared with Office 97, before smartphones were a glint in anyone’s eye. Mobile Outlook has hundreds of millions of downloads on both iOS and Android; quite a feat, as later this year Windows Mobile sinks quietly beneath the waves.

The genesis of Outlook on the phone as we know it today, is perhaps the acquisition of a company called Accompli 5 years ago, and a great deal of refinement and effort since.

Somewhat interestingly, traces of the same app have come to Windows as well – namely the Mail and Calendar app(s) that are in the box on Windows 10. Look back to ToW 445, and you’ll see that the names for the apps are outlookcal, outlookmail and outlookaccounts. Stick a “:” on the end and you can run them from a prompt.

e.g. Hit WindowsKey+R then enter outlookcal: and you’ll jump straight into the Calendar app.

Both have come a very long way – at first release, they were pretty basic, but they’re now so well featured that most people could use them as their primary email and calendar apps, most of the time.

The Calendar app is functionally pretty similar to the Outlook desktop app, except when it comes to working with other people – there’s no way to view someone else’s calendar, for example, but for a personal diary of appointments it’s really very good. And if you want the best of both worlds, you can connect your Office 365 account to both Outlook – as might be your primary way of working – and to the Mail and Calendar apps, for some side benefits and quicker ways of getting some things done.

Go into the settings on the Calendar app, then Manage accounts, then + Add account… or just Win+R then outlookaccounts: and you’ll be able to add your Office 365 account onto both Mail and Calendar.

If you have multiple calendars connected – like home Office 365, Gmail or Outllook.com accounts as well as your corporate one – you could selectively enable them for display in the app, and the set of calendars that are shown will also appear in the agenda if you click on the clock / date on your taskbar. You can also see your upcoming appointments in a live tile on the Start menu, if you still use such things.

You’ll also see your next appointment on the Windows Lock Screen if you have it enabled under Lock screen settings.

You may want to go into the Notifications & actions settings page (just press Start and begin typing notif…) and turning off Calendar notifications, or you’ll get a blizzard of reminders from desktop Outlook and the Calendar app.

Tip o’ the Week 474 – Parse and Flow

Posted on April 5, 2019 by ewand

Microsoft Flow was introduced a couple of years ago, and covered in ToW #401; it’s basically a glue between different online applications, allowing the exchange of data between them and being driven by events and actions.

Sign up, sign in, and when you go to create a new Flow, you can start with a blank canvas, or by customising a pre-built template, of which there are many.

Learn how to build Flows here.

Many of the templates for Flow are quite esoteric – when a tweet on a particular topic appears, write a log to a Sharepoint site and send a notification to a Teams channel, that kind of thing. But there are plenty of really useful connectors that can be combined in time-saving ways; here’s a really handy way of bringing traditional data sources into the modern era: an email parser, called Parserr.

After signing up with Parserr – free if you only need a few uses per month – you can then crack open mail that is consistent in format and contains some information you’d like to extract and use elsewhere, such as confirmation of an appointment or maybe a travel booking. In practice, you get given an inbox with a unique email address within Parserr and you’d set up a rule in Office365 or Outlook.com to send mails that meet some inbox rule to that address, where it would be parsed for you and key data fields then sent back to Flow.

e.g. if email comes from a specific source address or it has a subject that indicates it’s a particular type of reservation, then forward to your nnnnn@mg.parserr.com inbox address, extract the details of the booking then do something with them within Flow.

Start by sending an example mail to your Parserr inbox, then you can define rules to identify content within it (by looking for set keywords, going to specific line numbers and so on).

Create a rule for each piece of information you want to extract, and it will effectively create a field:

Once set up, you create the Flow by choosing the connectors for Parserr and whatever other applications you need to work on the information.

In this example, we’re using Office 365 to create an appointment that matches a reservation – the arrival and departure dates are provided by the source email, and converted to YYYY-MM-DD format within Parserr, then dragged across in Flow to match the Start & End times of an “event”. We’ll tack on T16:00 to the arrival time and T10:00 to the departure as that’s the check in and check out times, and thus create an ISO8601-compliant date/time such as 2019-04-05T08:00, which Office365 will use as the start or end time of an appointment.

“Advanced options” gives you further control (such as adding body text that might contain static text and other fields provided by Parserr, other addresses to forward the invite to, setting if you want it to be free/busy/tentative, reminder duration, time zones etc).

And that’s it: you can test the logic is working within each system – in Parserr, you can continually re-run the processing of your initial sample mail until you know the data is being extracted as you’d like, and within Flow you can keep testing your formatting etc by either triggering a new input or by working with the last set of data that came over from the source.

Once you’re happy just save the Flow, and it will automatically create an appointment in your calendar every time you get a matching email forwarded to the Parserr system – all in a few seconds.

See more on using Parserr with Flow and here’s a worked example.